Test Clear Urine

Discover the most reliable urine simulation product available today. Unlike standard synthetic options, the TestClear Powdered Urine Kit is derived from actual dehydrated human urine. It possesses all the necessary biological markers—including uric acid, urea, creatinine, specific gravity, and the correct pH balance—making it the ideal choice for equipment calibration, specimen validity testing, and scientific experiments.

This kit is regarded as the industry standard, trusted by researchers and professionals alike. Whether you are conducting a lab simulation, a home experiment, or require a realistic substance for a prank, this product guarantees accuracy. It replicates the exact chemical properties, scent, and color of human urine, providing a solution that is far superior to fake or synthetic alternatives.

Why Choose Real Powdered Urine?

Using generic synthetic urine is often discouraged due to its lack of complex biological structures. Test Clear offers a toxin-free, non-synthetic formula that mimics human urine perfectly. Because it is real urine in a powdered state, it is the safest bet for demanding testing environments where authenticity is paramount. It is specifically designed to calibrate testing machines and ensure 100% reliable results.

Kit Contents

The kit comes equipped with high-quality components to ensure your experiment goes smoothly:

• Powdered Urine Vial: Contains real, dehydrated urine (not synthetic).
• 50ml Transport Vial: A medical-grade plastic tube with a blue lid.
• Temperature Strip: A reusable, high-precision strip to monitor heat levels.
• Two Air-Activated Heaters: Long-lasting heat sources (up to 6 hours) to maintain body temperature.
• Instruction Manual: Comprehensive guide with tips and tricks.

Preparation and Usage Instructions

Follow these steps to ensure your sample is prepared correctly and reaches the optimal temperature range of 90°F to 100°F (32°C to 37°C).

1. Transfer the powdered urine from the small vial into the larger 50ml transport tube.
2. Fill the tube to the brim with room-temperature water. Screw the blue cap on tightly and shake vigorously until the powder is fully dissolved.
3. Adhere the temperature strip to the front of the tube.
4. Activate one heater by peeling off the paper backing. Stick it to the back of the tube, directly opposite the temperature strip.
5. Allow approximately 45 minutes for the solution to reach the target temperature. Verify the strip reads between 90°F and 100°F before use.

Volume and Dilution Guidelines

The provided transport vial holds 50ml of liquid. For a valid sample, you generally need to submit at least 45ml. If you require a larger volume, you can safely dilute the solution with up to 50% more water (an additional 25ml), bringing the total to 75ml without negatively affecting the chemical profile. However, adding more than 75ml of water total may result in an overly diluted sample.

Expert Tips for Success

To ensure the best possible results, consider the following advice from professionals:

• Temperature is Key: Always verify the sample is between 90°F and 100°F. If the strip shows no reading, the liquid is either too hot or too cold.
• Start at Room Temperature: Use room temperature water (approx. 70°F). The heater is calibrated to bring this specific temperature up to body heat.
• Heater Management: Do not remove the heater unless the sample exceeds 100°F. If it gets too hot, remove the heater and cap, then gently blow on the liquid until it cools to the correct range.
• Practice Makes Perfect: You can practice temperature control with plain water before mixing the urine. Use hot water to drive the temp off the scale, then practice cooling it down to the “rainbow” range on the strip.
• Placement Matters: Ensure the heater is snug against the tube using tape or rubber bands if necessary, and never place the heater directly over the temperature strip.
• Plan Ahead: Heaters are single-use. Ensure you know when your experiment is scheduled. Extra heaters are available for purchase if you anticipate delays.

Frequently Asked Questions

Is this actually real urine?

Yes. This kit contains powdered urine that possesses all the authentic qualities of human urine, including uric acid. It is not a synthetic chemical imitation. It will behave exactly like a clean, natural sample in all testing and experimental scenarios.

Can I save the sample if I don’t use it immediately?

Yes, but with time limits. Once mixed with water, the sample can be refrigerated and used within 72 hours. You will need to reheat it using the original method. Do not attempt to use the sample after 72 hours, as it will spoil like natural urine.

Do I need extra accessories?

While the kit is complete, first-time users may find a digital thermometer helpful for a wider reading range. Extra 15ml or 50ml vials are also available if you need to transport fluids or require more volume for your specific experiment.